Arm & Hand Surgery Table, Carbon fiber, long Arm & Hand surgery table is designed to fit several different operating tables. The table is made from carbon fiber laminate for excellent x-ray fluoroscopy facilities. On the rear end there is an accessory rail, for infusion stand and anesthetic frame. ...
Armboard, x-ray The arm board is designed for use with a C-arm image intensifier. It has a radio translucent top, making it perfect for fluoroscopy of the arms of the patient. It is also useable as a traditional arm board to put a drip needle into the arm of the patient. Standard clamp included (see picture)
Safety Side Rails For Operating Table The safety side rails are designed to support a patient on an operation/treatment table or trolley. They fold down easily and lock automatically when folded down to the vertical position. Specification: Length: 616 mm Height (without clamping part): 289 mm...
Lateral Support For Operating Table Adjustable with 2 models of cushions included: 1 plane and 1 multifunctional curved cushion. Specifications: Length of post: 350 mm Plate 175x70 mm The lateral support is also available as a rotating support ref: 10-560
Cover intended to be used together with arm holder 10-554 to get better comfort to the patient during long time operations. The pocket of the cover shall be pulled over the arm holder and be turned outwards to get the upholstery towards the patient.
Hernia Bridge For Operating Table Hernia bridge with crank operated elevation. Adjustable width (490-550 mm) to fit various Operating Tables. The Hernia bridge is in the same performance as the Kidney elevator, with a difference in the plate. Cushions are included.
Leg/Body Strap for Operating Table Two piece Leg Strap, velcro fastening, designed to keep the legs of a patient fixed to the operating table during various surgical procedures. Specifications: Length: 850 mm:s (velcro part = 450 mm) Width: 85 mm.
Leg and Body Strap for Operating Table Leg Strap with “hook” and velcro locking. The leg strap 10-464 is designed to keep the legs or the body of a patient fixed to the operating table during surgical procedures. It is soft padded for high patient comfort. Specifications: Length 167 cm Width 12,5 cm
Transport Handles For Operating Table The transport handle is intended to be fixed to the back section of an operating table when the operating table is to be moved with or without patient. The idea is to avoid moving the table using the head rest as transport handle. The transport handles shall be hooked from the upper side of...
Clamp For Operating Table A fixed non-rotatable clamp for the EUR standard rail 25x10. Accessories with a post diameter from 16–20 mm can be held in this clamp. Also available is a variant with flat pushing plunge for accessories with one or two flat surfaces on the post. The Clamp is called 10-302-P
Head Support For Operating Table An universal head rest. The angel movement of the head plate is supported by a gas spring, which is released by a wide U-shaped release handle. Specifications: Angle upwards 20° Angle downwards 32° Cushion is included.