Arthrex AR-8300 APS II Arthroscopic Shaver System

Used Arthrex AR-8300 Adapteur Power System II Arthroscopic Shaver System

The system is microprocessor controlled and can operate several different handpieces. Handpieces are connected to the console by means of a cable and are operated by a waterproof footswitch or by the front panel switches.

The AR-8300 console is designed for continuous operation. The motorized handpieces are individually protected by a resetting thermal fuse. In the event of a motor overload fault (e.g., excess current) the fuse heats up and the device is de-activated. When the fault is removed and the thermal fuse cools down (typically about 30 seconds) operation resumes, retaining the pre-failure settings.

The cable and all handpieces can be sterilized. This means that the handpieces can be changed during the surgical procedure without endangering surgical sterility. 

Specifications: