AGASAN MRI Patient Transport Tables with Side Guards
• The headrest is continuously adjustable (up to +30°) and secu-redwith clamping rodmechanism.
• The headrest and the main surface have an upholstery thickness of 64mm.
• The MRI table will be supplied with a height of 650 mm, unless requested otherwise at time of ordering.
• This MRI transport table include two side guards (each 800x 250mm, LxH). In order for this MRI table to be accessed from both sides, the side guards can be adjusted up or down with a simple rotation mechanism and locked in place with a
• The MRI transport table with side guards are equipped with four locking multi-directional castors (Ø 100mm).
• One standard width are available : 650mm. However, please take into consideration the overall width of the table including the side guards.
• With side guards, Article No. AWL-3065/VA has a width of approximately 795 mm.
The MRI transport table is also available with hydraulic height adjustment to make getting on and off more convenient for the patient. (Art. N° N-AGAH3065YVA).
• The infusion pole (Article No. N-AGAINF1720VA) includes a bottle holder with four hooks and a fixing clamp. The clamp can be bolted on either side of the tabletop frame. Retrofitting is not possible.
• The paper roll holder for the 650mm wide MRI tables (Article No. N-AGAP3050) or 800mmwideMRI tables (Article No. N-AGAP3070) is mounted between the frame legs at the foot end. Retrofitting is only possible after drilling.